产品中心

我们的质量是通过严格的测试，高质量的原材料，专有的工艺

Products

产品分类 



您目前所在位置：

首页

>

无分类内容

>

Matal 3D printing air circulation filtration system

Number of views:

1006

Matal 3D printing air circulation filtration system

This product is mainly used to collect and purify dust produced by laser sintering in the process of metal 3D printing. For getting a better workpiece during metal 3D printing, the finer the powder is, the better the performance will be. Different size of dust will be produced, so the single filter is very difficult to handle dust, based on the machine three level filtration design, different powder use different filter, make filter a longer life. Dust with large particle size is buried by sand, and dust with easy spontaneous combustion is neutralized by liquid inertness to ensure explosion safety.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1006

Product serial number

TAF-10

Quantity

-

+

Stock:

Category

BACK



1

资质文件服务保障

Details

[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[Product parameters, Parameters]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Product description

This product is mainly used to collect and purify dust produced by laser sintering in the process of metal 3D printing. For getting a better workpiece during metal 3D printing, the finer the powder is, the better the performance will be. Different size of dust will be produced, so the single filter is very difficult to handle dust, based on the machine three level filtration design, different powder use different filter, make filter a longer life. Dust with large particle size is buried by sand, and dust with easy spontaneous combustion is neutralized by liquid inertness to ensure explosion safety.

In the process of metal 3D printing, dust generated by sintering will have a great impact on the quality of printed parts, so does oxygen.Therefore, this product is equipped with oxygen content monitoring during the cycle job. Inert gas will be replenished automatic if oxygen content is over value.

Power generated by i mported i nverter blower. With stable pressure and airflow, continuous operation, strong power and high efficiency, low noise, good sealing，etc. The product is equipped with powder position sensor and automatic alarm when the powder is full.The powder bin and dust collecting bucket can be replaced without stopping the machine.A sensor is set up to monitor the inside and outside of filter pressure, and automatically blow back to prevent the blocking of the filter make a l onger life.

Product Features

1

Primary filtration of large particle dust can make filter longer life. Powder bin with sand flling design will prevent the risk of spontaneous combustion. It can be replaced without stopping machine, provide high printing efficiency.

2

A special design Of modular, mobile, wet inert filter bucket Can be replaced Without Stopping machine, provide high printing efficiency.

3

HI3 filter degree Can be reached efficiency Over than 99.95% On 0.3μm

4

Automatic atmosphere monitoring

5

Automatic air flow and pressure monitoring. mported inverter blower with intelligent working, maintain pressure and airflow.

6

Automatic air circulation system, internal air will be replaced before operation, to ensure air inside conforms to the set value.

7

A position Sensor design for automatic material drop monitoring. It will alarm When material is ful.

8

Automatic blow back design, when the pressure difference between the inside and outside of the filter reaches the set value, it will automatically working to self clean, extending the service life of the filter.